Note: Every acrylic keychain has protective films on both sides. Peel off the film on the printable side before printing, then peel off the other one after printing.

Printing Instructions:
1. Print your image on sublimation paper, no need to mirror the image;
2. Take off the ring from the keychain;
3. Set low printing pressure;
4. Set printing temperature to 180℃ and time to 80 seconds.
5. Peel off the protective film on the printable side;
6. Tape the image on the keychain;
7. Put a piece of protective paper on the heat press, place the keychain with the printable side up, then cover it with another piece of protective paper to avoid ink stains on the heat platen, and press the keychain.
8. Peel off the paper and the protective film on the other side.
9. Attach the ring to the keychain.

 

Printing notes:

1) They can not be printed with too much pressure
2) They must be preheated before printing
3) The printing image can not be a mirror as you see through the glass material
4) They can not be put into the water at once as the printing process is over
It will not be a problem if you can handle these methods to print Glass products: http://youtu.be/IYsK1xCmOIE
The videos of BLP08 and BLP10 have been attached as below, where these notes have been fully emphasised. So eveybody can try to learn.
Item Name: 10'' Glass Plate
Item No.: BLP10
Material: Glass
Weight: 10kg
Packing: 15pcs/carton
Dimension: 350*265*282mm
 
Item Name: Glass Mugs (Clear)
Item No.: B1G-02
Weight: 13kg
Material: Glass
Dimension: φ8.2*H9.5cm
Packing: 36pcs/Carton, 410*270*310mm
 
Item Name: Crystal Glass Frame 16
Item No.: SG-16
Material: Tempered glass
Packing: 20pcs/Carton
Dimension: 415*260*205mm
Weight: 22kg
Size: 230*180*10mm
Item Name: Silicon Vacuum Heater Unit
Item No: ZK-MFD
Applicable Machine: 3D vacuum sublimation box
Relevant videos : http://youtu.be/O3X9yiP8p_o
Respective advantages compared with ZJD02 Silicon Flat Mat for SZM3D


ZK-MFD: Silicon Vacuum Printing Unit can broaden the printing area of Silicon Flat Mat, which makes the printing function of 3D vacuum sublimation box more widely used ,such as sovling the problem that two sides printing effects of Silicon Flat Mat for SZM3D is not ideal. Silicon Vacuum Printing Unit can print two aspects of one product simultaneously, like ceramic hangings,etc. Further more, it ‘s not easy to burst when printing on products with comparatively large curved surface for a long time ,like Plate for Full image Printing, and so on

Item Name: Silicon Paper(11“X17”) and Silicon Paper(8“X11”)
Item no. GYZ1117 & GYZ0811

Two sizes available: 11“X17” and 8.5“X11”. The usage is same as Thermal Resistant Paper, but it can create better printing effect for some products due to its oiliness. The Thermal Resistant Paper will have to be torn until getting cold 3 minutes later if you use the dark transfer paper, but you can tear the paper at once as long as you put the Silicon Paper on its surface, which is time saving. It might be easily stuck onto the leather material when printing using Thermal Resistant Paper, which will influence the quality of your product. But Silicon Paper won’t. What’s more, another advantage of this Paperis that it can be used repeatedly while keeping its favorable price

Apple and Samsung, the world fashion Leaders, present new direction of the market by publishing a new round of products including iPod Touch 5, iPad mini and Galaxy Note 2 N7100. Soon, youngsters will hold these handsets, walking, gathering and travelling. How to protect the delicate electronic products these beloved in a fashionable manner? Any chance to make your handset differently beautiful from others? BestSub Technologies gives thousands of millions of Apple fans and Samsung addicts a new way with our latest special designed covers.

Our covers are formed by eco safe plastic, safe to human body and the environment. In addition, the case itself or the aluminum sheets are directly coated for sublimation printing, making them sample in use and perfect in decoration.

Item Name: iPod Touch 5 Plastic Case
Item No: ITK03/ ITK04
Material: Plastic
Color: White and Black
Packing: 500pcs/ctn
Weight: 7KG/ctn
Dimension: 410*295*310
Feature:
1. Fashionable style and truly protective design;
2. Clear and vivid sublimation printing effect;
3. Durable material and cost effective;
4. Special made for these popular products.

Place orders at BestSub and take these beautiful covers home for personal use or promotional gifts.

Related Products

3D iPhone5 Cover

3D iPad Cover

iPad mini Cover

Kindle Fire Cover

HTC One X Cover

3D Samsung S3 Cover

Samsung Galaxy Tab P6800 Cover

Samsung GALAXY Tab P6200 Cover

Samsung Galaxy S3 i9300 Cover

Samsung Galaxy S3 Foldable Rubber